Hannstar K Mv 4 94v 0 Manual

  пятница 01 февраля
      96

• 8909 Answers SOURCE: The location of the jumpers or dipswitches may vary; however, here are some locations of the jumpers / dipswitches. • On the edge of the motherboard - Most jumpers are located on the side of the motherboard for easy accessibility, verify by looking at all visible edges of the motherboard. • By the CMOS battery - Some manufactures will place the jumper to clear the CMOS / BIOS password by the actual battery. • By the processor - Some manufactures will place the jumpers by the processor of the computer. Gradjevinski dnevnik obrazac. However, note that in some cases these jumpers will be to change the processor and not the password.

• Under the keyboard or bottom of laptop - If you are working on a the location of the dipswitch (almost never a jumper) can be under the keyboard or on the bottom of the laptop in a compartment such as the memory compartment. • Other visible location - While it is possible that the jumpers / dipswitches may not be in a visible location, most manufactures try to make things easier by placing the jumpers / dipswitches in another visible location. • Jumpers may also be found underneath or allongside the memory modules. Alcatel office 4200 installation manual instructions I hope this helps but suggest that the manufacturers web site or your instruction manual, may have the answer. Posted on Oct 23, 2010.

Schematics 4 Free Service manuals, schematics, documentation, programs, electronics, hobby.

Hannstar

Hannstar J MV-4 94V-0 0651' If you know how to remove the CMOS battery on the motherboard of your laptop this will solve your problem. The BIOS password is stored in CMOS memory that is maintained while the PC is powered off by a small battery, which is attached to the motherboard.